Labs of Martin Kruliš
Monday 15:40-17:10 (both even and odd)
Room: N11
All communication should be conducted in Mattermost (the invitation link is in the note of the SIS scheduling event and it was also sent to you by email). Join the #nswi170-compsys-krulis channel.
If you cannot use Mattermost, send me an email to krulis -at- d3s.mff.cuni.cz, but Mattermost is the preferred channel.
Good to know
Make sure you have read important notes on the general labs page. Especially the ethical guidelines, coding guidelines, and technical details regarding the Arduino platform.
Credit
Grading rules for receiving credit are the same for all labs. You will need
- to solve tasks from all six labs and submit them to ReCodEx in time
- get at least 7 points from reviews
- successfully pass the final lab test
Please, observe the deadlines in ReCodEx carefully, as they are hard deadlines. If you get into any kind of trouble keeping up with your assignments, let me know immediately so we can negotiate a mutually acceptable solution. Failure to deliver an assignment without prior arrangement or serious objective reason will cause you to fail the course.
Assignment reviews and acceptance
Each in-labs assignment will have the following pattern:
- We will start the assignment during the labs progressing step by step.
- If you do not finish the assignment in the labs (or you do not attend the labs), you can finish it on your own at home.
- Your debugged and tested solution needs to be uploaded to ReCodEx before the deadline, which will be roughly one week after the labs. The solution must pass all the tests (get 100% correctness).
- I will review your solutions collectively after the submission deadline (usually within a few days) and give you feedback in the form of a code review (in ReCodEx). Each student's last solution that reached 100% correctness is reviewed unless you explicitly tell me otherwise.
- If your solution is acceptable (no serious issues are raised in the review), you will receive points (
Xpoints for X-th assignment). If not, you may correct them and ask for additional review (explicitly, preferably by Mattermost), so you can obtain the points later. There is no explicit limit for how many times you can iterate the reviews, but any additional reviews will be performed only up to three weeks after the deadline and an iteration can easily take a few days. - Solutions that have been reviewed and are acceptable (even if they have issues) are marked as accepted in ReCodEx. You need to get all six assignments accepted to receive the credit. A solution is not accepted only in case of severe problems (submitted too late, plagiarism, severe case of unforgivable curse infestation).
Please note that I am not reviewing solutions that did not pass ReCodEx tests (have below 100% correctness). If you are submitting revisions that are not final (i.e., you do not wish me to review them since you plan to work on your solution further), mark them by attaching an appropriate note and I will ignore them.
Labs schedule
Please note that the following materials were copied from last year and some revisions might still occur.
The labs are held bi-weekly, with two lab groups altering odd/even weeks. Thus there is one topic (and one set of slides) for every fortnight. However, each lab group has its own ReCodEx group, thus the assignment links are different each week (also the assignments have different deadlines).
The slides are stored in Microsoft SharePoint. You need to sign in using your <UKCO>@cuni.cz as the login name.
That will redirect you to our CAS, where you can verify your credentials.
You can also download all slides directly as slides.zip package from this server directly.
| Date | Topic | Slides | Attachments |
|---|---|---|---|
| 19.2.2024 | C/C++ language | lab01-C.pptx | |
| 26.2.2024 | |||
| 4.3.2024 | Arduino IDE, setup/loop, LEDs | lab02-Blinkq.pptx | result video |
| 11.3.2024 | |||
| 18.3.2024 | Arduino LEDs & Buttons | lab03-Buttons.pptx | task 6 video |
| 25.3.2024 | |||
| 15.4.2024 | Arduino 7-seg display | lab04-7seg.pptx | result video |
| 8.4.2024 | !!! | ||
| 29.4.2024 | Arduino 7-seg display - multiplex | lab05-7segmux.pptx | multiplexing |
| 22.4.2024 | task 5 video | ||
| 13.5.2024 | Arduino 7-seg display - running message (strings & pointers) | lab06-7segalpha.pptx | result video |
| 6.5.2024 | |||
| 20.5.2024 | TBA |